### Steps to Install Professional Iwa Milita Fixed BollardsProfessional Iwa Milita Fixed Bollards.
#### Step 1: Preparation.
1. Gather all the necessary tools and equipment for the installation, including a drill, concrete anchors, bolts, and a measuring tape.
2. Locate the area where you want to install the bollards and mark the positions where the bollards will be placed.
#### Step 2: Digging Holes.
1. Use a post hole digger or an auger to dig holes at the marked positions. The depth of the holes should be at least 1/3 of the length of the bollard.
2. Make sure the holes are wide enough to accommodate the base of the bollards.
#### Step 3: Setting the Bollards.
1. Place the bollards in the holes and make sure they are level and upright.
2. Fill the holes with concrete to secure the bollards in place. Use a level to ensure the bollards are straight.
#### Step 4: Securing the Bollards.
1. Attach the bollards to the concrete by drilling holes in the base of the bollards and inserting concrete anchors.
2. Tighten the bolts to secure the bollards in place.
#### Step 5: Finishing Touches.
1. Clean up any excess concrete around the base of the bollards.
2. Allow the concrete to dry and cure according to the manufacturer's instructions before using the bollards.
Following these steps will help you install Professional Iwa Milita Fixed Bollards securely and efficiently.
If you want to learn more, please visit our website manual tyre killer manufacturer, automatic road blocker.